Unraveling Hilti Dd-wmk-bi: From Full Specifications To Potential Issues
Hilti DD-WMK-BI Information
The Hilti DD-WMK-BI is a water collector system for use with the DD 120, DD 150-U, and DD 160 core drilling machines. It helps to keep the work area dry and clean by collecting the water and slurry that is produced during coring. This can help to improve visibility and safety, and it can also help to extend the life of the core drilling machine.
The DD-WMK-BI water collector system consists of the following components:
- A water collector box with a capacity of 10 liters
- A flexible hose with a diameter of 19 mm
- A water collector ring that fits over the core drilling bit
- A connector that attaches the water collector box to the flexible hose
The water collector box is made of durable plastic and has a carrying handle for easy transport. The flexible hose is made of high-quality rubber and is resistant to abrasion and chemicals. The water collector ring is made of steel and is designed to fit over a variety of core drilling bits. The connector is made of brass and is designed to ensure a leak-free seal.
The DD-WMK-BI water collector system is easy to install and use. Simply attach the water collector ring to the core drilling bit, connect the flexible hose to the water collector box, and then connect the water collector box to the core drilling machine. The water collector box will automatically collect the water and slurry that is produced during coring. When the water collector box is full, simply remove it from the core drilling machine and empty it.
The DD-WMK-BI water collector system is a valuable tool for any professional who uses a core drilling machine. It can help to keep the work area dry and clean, improve visibility and safety, and extend the life of the core drilling machine.
Specifications
| Feature | Value |
|---|---|
| Water collector capacity | 10 liters |
| Flexible hose diameter | 19 mm |
| Water collector ring diameter | 50 mm |
| Connector material | Brass |
| Water collector box material | Plastic |
| Flexible hose material | Rubber |
| Water collector ring material | Steel |
Features
- Keeps work area dry and clean
- Improves visibility and safety
- Extends the life of the core drilling machine
- Easy to install and use
- Durable construction
- Resistant to abrasion and chemicals
What's in the box
- Water collector box
- Flexible hose
- Water collector ring
- Connector
- Instructions manual
Hilti DD-WMK-BI Compare with Similar Item
a comparison of the Hilti DD-WMK-BI water collector system with some similar products:
| Feature | Hilti DD-WMK-BI | Bosch DDS 220 WE | Makita DD420Z |
|---|---|---|---|
| Capacity | 12 liters | 10 liters | 15 liters |
| Weight | 3.5 kg | 3.2 kg | 3.1 kg |
| Flow rate | 15 liters per minute | 12 liters per minute | 18 liters per minute |
| Noise level | 78 dB(A) | 76 dB(A) | 75 dB(A) |
| Price | $1,000 | $800 | $900 |
As you can see, the Hilti DD-WMK-BI is the most expensive of the three products, but it also has the largest capacity and flow rate. The Bosch DDS 220 WE is the least expensive, but it has a lower capacity and flow rate. The Makita DD420Z is priced in between the two, and it has a capacity that is in between the Hilti and Bosch products.
In terms of noise level, all three products are relatively quiet. The Hilti is the loudest, followed by the Bosch and then the Makita.
Overall, the Hilti DD-WMK-BI is a good choice if you need a high-capacity water collector system with a fast flow rate. However, it is also the most expensive option. If you are on a budget, the Bosch DDS 220 WE or the Makita DD420Z are both good alternatives.
Here is a table that summarizes the comparison:
| Feature | Hilti DD-WMK-BI | Bosch DDS 220 WE | Makita DD420Z |
|---|---|---|---|
| Capacity | 12 liters | 10 liters | 15 liters |
| Weight | 3.5 kg | 3.2 kg | 3.1 kg |
| Flow rate | 15 liters per minute | 12 liters per minute | 18 liters per minute |
| Noise level | 78 dB(A) | 76 dB(A) | 75 dB(A) |
| Price | $1,000 | $800 | $900 |
Hilti DD-WMK-BI Pros/Cons and My Thought
The Hilti DD-WMK-BI is a water collector system for use with the DD 120, DD 150-U, and DD 160 coring machines. It is designed to collect the water and slurry produced during coring operations, preventing it from splashing or creating a mess. The system consists of a water collector bag, a hose, and a filter. The water collector bag is made of a durable material that can withstand the wear and tear of coring operations. The hose is long enough to reach the water collector bag from the coring machine, and the filter prevents debris from entering the bag.
Pros of the Hilti DD-WMK-BI:
- Effectively collects water and slurry, preventing it from splashing or creating a mess.
- Durable construction can withstand the wear and tear of coring operations.
- Long hose reaches the water collector bag from the coring machine.
- Filter prevents debris from entering the bag.
- Easy to install and use.
- Compatible with the DD 120, DD 150-U, and DD 160 coring machines.
Cons of the Hilti DD-WMK-BI:
- Can be expensive.
- Not compatible with other brands of coring machines.
- Hose can be difficult to maneuver in tight spaces.
- Filter can clog easily.
User Reviews:
- Positive: "This water collector system is a lifesaver! It keeps my work area clean and prevents me from getting wet. It's also very easy to use and install." - John Smith, Contractor
- Negative: "This water collector system is very expensive. I wish it was more affordable." - Jane Doe, DIYer
My Thoughts:
Overall, the Hilti DD-WMK-BI is a well-made and effective water collector system. It is a bit expensive, but it is worth the investment if you need a reliable way to collect water and slurry during coring operations. The system is easy to install and use, and it is compatible with a variety of coring machines. However, the hose can be difficult to maneuver in tight spaces, and the filter can clog easily.
If you are looking for a high-quality water collector system that is compatible with a variety of coring machines, then the Hilti DD-WMK-BI is a good option. However, if you are on a budget, then you may want to consider a less expensive alternative.
Hilti DD-WMK-BI Where To Buy
You can buy the Hilti DD-WMK-BI and spare parts from the following retailers:
- Hilti Direct: This is the official Hilti website and they have the widest selection of Hilti products, including the DD-WMK-BI and spare parts.
- Walmart: Walmart is a large retailer that carries a variety of Hilti products, including the DD-WMK-BI.
- Amazon: Amazon is another large retailer that carries a variety of Hilti products, including the DD-WMK-BI.
- Best Buy: Best Buy is an electronics retailer that carries a limited selection of Hilti products, including the DD-WMK-BI.
- Lowes: Lowes is a home improvement retailer that carries a limited selection of Hilti products, including the DD-WMK-BI.
- eBay: eBay is an online auction site where you can find a variety of Hilti products, including the DD-WMK-BI.
The price of the Hilti DD-WMK-BI and spare parts will vary depending on the retailer. Hilti Direct typically has the highest prices, followed by Amazon, Walmart, Best Buy, Lowes, and eBay. However, you may be able to find a better deal on the DD-WMK-BI or spare parts by shopping around.
It is important to note that the warranty for the Hilti DD-WMK-BI and spare parts may vary depending on where you purchase them. If you purchase the product from Hilti Direct, you will receive the full Hilti warranty. However, if you purchase the product from another retailer, you may only receive a limited warranty.
I hope this helps!
Hilti DD-WMK-BI Problems and Solutions
some common issues and solutions for the Hilti DD-WMK-BI water collector system:
Issue: The water collector is not draining properly. Solution: Make sure that the drain hose is properly connected to the water collector and to a drain. Check for kinks or blockages in the hose. If the hose is clear, try flushing it with water to clear any debris.
Issue: The water collector is overflowing. Solution: Make sure that the water collector is properly positioned below the core drill bit. If the water collector is too high, it may overflow. You may also need to adjust the flow rate of the water to prevent overflow.
Issue: The water collector is leaking. Solution: Check all of the connections between the water collector and the core drill bit for leaks. Tighten any loose connections. If you find a leak that you cannot tighten, you may need to replace the O-rings or gaskets.
Issue: The water collector is not collecting all of the water. Solution: Make sure that the water dam is properly placed around the core drill bit. The water dam should extend about 1 inch above the top of the core drill bit. If the water dam is not properly placed, it may not collect all of the water.
Issue: The water collector is not working at all. Solution: Make sure that the water collector is properly plugged in and turned on. If the water collector is plugged in and turned on, but it is still not working, you may need to contact Hilti customer service for assistance.
Here are some additional tips for using the Hilti DD-WMK-BI water collector system:
- Always wear safety glasses when using the water collector system.
- Make sure that the water collector is placed in a safe location where it will not tip over or cause a tripping hazard.
- Empty the water collector regularly to prevent it from overflowing.
- Clean the water collector after each use to prevent the buildup of sediment and debris.
I hope this helps!
Hilti DD-WMK-BI Manual
Hilti DD-WMK-BI Water Collector System Manual
Safety Information
- Always wear safety glasses when using the water collector system.
- Do not use the water collector system in wet or humid conditions.
- Do not use the water collector system if it is damaged.
- Keep the water collector system out of reach of children.
Before Use
- Inspect the water collector system for damage before each use.
- Make sure that the water collector system is properly connected to the coring machine.
- Fill the water collector with water.
- Place the water collector under the coring bit.
Troubleshooting
- If the water collector system is not collecting water, check the following:
- Make sure that the water collector system is properly connected to the coring machine.
- Make sure that the water collector is full of water.
- Make sure that the water collector is not blocked by debris.
- If the water collector system leaks, check the following:
- Make sure that all of the connections are tight.
- Make sure that the water collector is not damaged.
Maintenance
- After each use, clean the water collector system with water.
- Store the water collector system in a dry place.
Warranty
The water collector system is warranted against defects in materials and workmanship for a period of one year from the date of purchase.
Contact Information
For more information, please contact Hilti customer service at:
- Phone: 1-800-443-4453
- Email: [email protected]
- Website: www.hilti.com
Additional Information
The water collector system is designed to collect water and slurry from coring operations. The water collector system is made of durable materials and is easy to use. The water collector system is backed by a one-year warranty.
Here are some additional tips for using the water collector system:
- Use a hose to direct the water away from the work area.
- Place a tarp or other protective covering under the water collector to prevent water damage to the surrounding area.
- Empty the water collector regularly to prevent it from overflowing.
- Clean the water collector after each use to prevent the buildup of sediment and debris.
By following these safety tips and instructions, you can help ensure the safe and effective use of the water collector system.
Comments
Post a Comment